Double Glazing Locks Repair
When a double-glazed windows will not close, it causes draughts that allow valuable heat to escape. This can also compromise the security of your home and puts you at a greater chance of being burglarized.
Double-glazed window seals, hinges, and handles can break down over time. If this is the situation it could affect the performance of your windows and invalidate any warranties you may have.
Locks that aren't working
Many people install anti-burglar devices on their main doors and gates however, they overlook that windows are prime targets for burglars. Faulty locks can cause draughts, let valuable heat escape and weaken the security of your house.
If you find that your uPVC window locks are not functioning, there is likely that the lock mechanism has become stuck. This usually happens due to a split in a gearbox component. This could cause the handle to not open, but instead to rotate 360 degrees. This is a frequent issue with uPVC casement windows, but is also present in tilt and turn windows, and even sliding sash windows.
If this happens, unlock the lock by pressing the lever handle. This can allow you to free the gear box and restore the window's opening. If this does nothing, you may have to replace the entire mechanism for locking windows.
Most modern uPVC windows use espagnolette locks. They are a locking system inside the window that secures the window employing locking cams shaped like mushrooms that are built into the frame keeps. The handle is the trigger for the gearbox, which activates the cams for either up or down movement. A common issue is when the spindle on the lock has broken, causing the handle to move freely but not move the window open or close.
A damaged transmission could make your window appear to be locked but it's not. This could happen when the rods in the centre, also referred to as crocodile tooth fixings in the gearbox snap off. Misty Glaze will supply and install replacement rods if this occurs.
It is important to not force a broken or stuck lock. This can cause a lock to break or snap in particular if you are using a uPVC windows that expands and contracts as temperatures change. To avoid this problem, it is recommended to seek out a professional locksmith to identify the problem and repair it.
Sticky Doors/Window
It's a nuisance to have doors and windows that are stuck and sag, but they can also be indicative of more serious structural problems. If you find it difficult to open or close a door or window it is important to seek out professional assistance immediately. This issue can be caused by a number of reasons, including foundation settlement or the lack of support for the crawl space.
Humidity or frame problems could cause windows and doors to become stuck. If your frames are made of wood, for instance, they may become brittle when exposed to moisture. This can make opening and closing them a challenge, even if the hardware in good condition. The wood expands as it expands and is pushed up against the hinges, creating friction.
Rub the door or window with soap to lessen friction if it sticks in the summer. It will shrink and may temporarily solve the problem. This procedure will have to be repeated sporadically during times of high humidity.
Sanding the frame of the door or window to a smooth surface is a more permanent fix. This can be done by hand or with an electric tool. A professional can also sand and paint or stain your door or frame to make it appear new again.
If the sanding and soap don't help, it's likely that the issue is due to foundation settlement or a weak crawl space. Examine for cracks in your area. It's time to call an expert in foundation when you spot any of these signs. Foundation damage can cause uneven flooring and sloping interior walls and, in turn, sticking windows and doors. To avoid future costly and risky repairs, it's essential to deal with these problems as soon as they can be addressed. These issues could escalate until your home is structurally unstable if left unattended. Contact the Southeast's top foundation repair specialists today to schedule an inspection and repair service!
Cracking/Blowing Issues
When double glazing begins to wear down, it could cause cracks to appear. This can be an unsightly sight, and can also let all the heat from your home to escape. It also poses an injury risk for your family members as the glass pieces can cause injury if they break. It is recommended to repair any double glazing windows that show a crack before it gets worse, as this will increase the cost of replacing them.
Window seals are essential for keeping air in between your window panes, and also to stop drafts from entering your home. However, over his response can become perished or shrink due to weather changes. If not taken care of, this can lead to moisture in the home, condensation and draughts.
This issue is typically solved by a professional. They can replace the window seal to restore your windows back to their original condition. They can also recommend features that will reduce future stress cracks, such as trickle ventilation to improve ventilation.
You can also lubricate the handles and hinges on your doors and windows. This will help them move more smoothly and allow the lock to work as intended. Rub lubricating oils onto a lint free cloth and rub them into the hinges or handle mechanism, as well as areas where they pass through frames (for instance, a sash window). It may also be beneficial to remove handles from their frames and clean them by using warm water to get rid of any dirt or grit that may have been sunk into them.
If your uPVC doors and windows are not functioning in the way they should, it's crucial to contact an expert to fix them. They will be able to identify the problem quickly and fix it in a short period of time. It's much safer and cheaper than trying to fix the issue yourself and potentially damaging the mechanism. You'll also have peace of mind knowing that your home is secure and safe.